Neal's CNC

1414 & 1424 W. Winton Avenue, Hayward, CA 94545

510-783-3156 | service@nealscnc.com

  • Yelp
  • Facebook

Blog

Categories: All · CAD Tips · Featured Projects · Getting Started · The Basics · Unusual Materials

Part Numbers

January 5, 2022 · The Basics

Part numbers aren't essential for the cutting process.  However, if you have more than a few parts you need cut, especially if any of them are similar (a left and right pair, for example), part numbers are a very useful way to track them. We may need to discuss a particular part or set of parts with you, or you may need to know which part is which for ease of assembly.  Neal's CNC is happy to write the part numbers on the parts for you, either directly or on a piece of masking tape, for no additional charge.  We can also engrave them on each part with a V bit, although this does add to the cut cost.

How custom CNC cutting works

May 27, 2021 · The Basics

A high level explanation of the custom CNC cutting process.

Exporting DXFs from Rhino

March 25, 2021 · CAD Tips

The process of creating the machine instructions ("g-code") for a CNC router, or any CNC machine, has certain limitations on the kinds of shapes it can accept. Here at Neal's CNC, we need drawings where the shapes are closed polyline objects. Any curves must be arc segments, not the more complex curves often referred to as splines or Bezier curves, and not a series of tiny straight lines approximating the curve. Depending on what software you have used to draw your parts, and what export settings you use, your results may be closer or farther from that goal.

Engraving on slabs

February 1, 2021 · Unusual Materials

Engraving lettering, logos, or other imagery into large wood slabs is something we are asked to do from time to time. Often the customer is planning to fill the engraving with resin for an inlaid look, or paint for contrast. We usually see conference tables, dining tables, plaques, and benches done with this treatment. It is also possible to combine engraving and inlays. In the piece shown below, we engraved the lettering and outlines, and inlaid two colors of acrylic as well as painting the engraved areas on both the wood and acrylic.

SPACE10 Growroom at Neal's CNC

April 4, 2017

As soon as the Medium article came out about this amazing structure, Neal's CNC started getting inquiries about cutting it. We got so many, in fact, that we spent a little time improving the cut layout, to minimize wasted wood and save money. Our plywood supplier, Moore Newton Hardwoods, was almost as excited as we were, and gave us a great rate on the wood.

Cutting Cake on the CNC Router

November 10, 2015 · Unusual Materials

We've always claimed to be able to cut just about anything... well, we cut cake this weekend! Here's what that looks like.

3d Graffiti

October 27, 2015 · Featured Projects

Local artist DJ Agana contacted us to sculpt a 3d version of her drawing "PASSION" for a show at Oakland Terminal Gallery. We love bringing art to life! We cut two copies, one for the gallery, and one for our office - "PASSION" is exactly what we have for this work.

Bench Go Round

October 26, 2015 · Featured Projects

CNC cutting techniques

October 19, 2015 · The Basics

There are a number of different cutting techniques for flat goods that can be computer controlled. CNC stands for "Computer Numeric Control" and basically means that the cutting head is moved in space along X and Y (or more) axes according to precisely specified coordinates. For example, the cutting head may move from 0,0 to 0,10 to 10,10 to 10,0 and back to 0,0 again, tracing a square of size 10.

Welcome to Neal's

October 3, 2015 · Getting Started

Well, here we are. After years and years, Neal's CNC has decided to jump into the 21st century with both feet, and start blogging. We hope to post something about once a month - no need to push it! - about interesting work we've done, new capabilities we've gotten, problems we've solved, and anything else that strikes our fancy. We hope you will find something of interest!