Neal's CNC

1414 & 1424 W. Winton Avenue, Hayward, CA 94545

510-783-3156 | service@nealscnc.com

  • Yelp
  • Facebook

Capabilities

With four CNC machines under one roof and a waterjet partner down the road, we can match each job to the tool that cuts it best.

Not sure which process suits your project? Send us your drawings with a request for an estimate and we'll recommend one. Many jobs use more than one machine.

Machine Bed Best for
Large format CNC router 5' x 10' Plywood, hardwoods, plastics, aluminum and other non-ferrous metals, sign materials
Standard tall CNC router 4' x 8', 16" Z Thick or tall parts, engraving finished furniture, 3D contours such as topographic maps
Laser cutter 5' x 10' Acrylic, thin plywood, paper and cardboard, leather, fabrics, soft foams and rubbers
Knife cutter 5' x 10' Acoustic felt, cardboard, corrugated plastic, rubber, foams, custom boxes
Waterjet (partner) 8' x 13' Steel, titanium, stone, glass, and material up to 6" thick

Large Format CNC Router

KOMO Innova 510 large format CNC router with cut parts on the bed

Our workhorse is a KOMO Innova 510 3-axis router with a powerful 12 HP spindle motor. It can speed through 3/4" plywood at up to 450 inches per minute.

The bed is 10' long and 5' wide. Raw materials wider than 5' won't fit on the machine. Material longer than 10', such as plank lumber, will fit, but we can't cut any parts longer than 10' from them. Multiple smaller parts are fine.

Our Z axis goes up to 6" from the bed of the table, giving a 3" limit on through cuts (the bit has to be 3" long, and it has to be able to travel entirely above the material). We can sometimes stretch this a little, get in touch to discuss your specifics and we'll see if we can figure out a way. For anything thicker, the standard tall router below may be the answer.

Standard Tall CNC Router

Motionmaster CNC router with 16 inches of Z height

Our Motionmaster router has a standard 4' x 8' bed, a 10 HP spindle, and a generous 16" of Z height. It's a 5-axis machine, but it's the height that earns its keep: thick blocks of material fit under the cutter, and so do many finished pieces. We can set a coffee table or an assembled desktop on the bed and engrave its top.

It also handles shaped contour cuts like topographic maps, terrain models and relief carvings in material too thick for the large format router.

Laser Cutter

Golden Laser 5 by 10 foot laser cutter

Our Golden Laser has a 120 W laser tube and a large 5' x 10' bed, so full 4' x 8' sheets fit with room to spare. It's ideal for acrylic, thin plywood, paper, cardboard, leather, natural and some synthetic fiber fabrics, and soft foams and rubbers. Unlike other cutting tools, a laser leaves acrylic with a glossy, polished edge, and it can cut fine detail that a router bit is too large to reach.

The laser can also engrave, marking text, logos or images into the surface of many materials. Not everything is safe to laser, however: PVC and vinyl, for example, give off chlorine gas when cut. If you're not sure about your material, ask us.

Knife Cutter

AXYZ Trident knife cutter

In the clean room, our AXYZ Trident cuts with blades instead of a spinning bit or a beam. It also has a 5' x 10' bed. It has both oscillating and rigid knives, and it can make full depth cuts or partial depth cuts that score or groove without cutting fully through the material. Knife cutting makes no heat and no dust, so soft materials come out with clean, unscorched edges. It's perfect for acoustic felt, cardboard, rubber and foams.

As well as the knife cutting, there's a creasing wheel attachment which presses fold lines into the material. This lets us make custom cardboard boxes, packaging and other folded structures. It can cut and crease corrugated plastic as well.

Waterjet

Our local waterjet partner has a Flow waterjet with a huge 8'x13' bed, 2 rotational axes, and the ability to cut up to 6" thick material. Materials ideal for waterjet cutting include all kinds of steels, aluminum, brass, copper, titanium, Hastelloy, Inconel, carbon fiber, plastic, (untempered) glass, and stone as well as various softer materials like foams, silicone, rubber, or neoprene. Materials that can't get dirty, such as felts and some foams, can be kept squeaky clean during cutting for an additional charge.

 

Contact Us

Location

Our office

Neal’s CNC

1414 & 1424 W. Winton Avenue
Hayward, CA 94545

510-783-3156

service@nealscnc.com

Subscribe to our mailing list

* required